Table of Contents
Advertisement
3. In the Select Controller dialog, go to the drop down box near the top and select the PC serial
port to which the drive is connected.
(If you are unsure which PC serial port is connected to the drive, select Scan all serial ports).
Click Scan to search for the FlexDrive
When the search is complete, click on FlexDrive
button.
Note: If the FlexDrive
the PC and that the FlexDrive
ports.
5-6 Operation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This check box is already selected for you. When you
click Select, it means that the Commissioning Wizard
will start automatically.
II
is not listed, check the serial lead between the FlexDrive
II
.
II
in the list to select it, and click the Select
II
is powered correctly. Click Scan to re-scan the
www.baldormotion.com
II
and
MN1902
Advertisement
Table of Contents
