Table of Contents
Advertisement
2.2 Receiving and inspection
When you receive your FlexDrive
1. Check the condition of the shipping container and report any damage immediately to the
carrier that delivered your FlexDrive
2. Remove the FlexDrive
container and packing materials may be retained for future shipment.
3. Verify that the catalog number of the FlexDrive
number listed on your purchase order. The catalog number is described in the next section.
4. Inspect the FlexDrive
carrier that delivered your FlexDrive
5. If FlexDrive
that conforms to the storage humidity and temperature specifications shown in section 8.1.19.
2.2.1 Identifying the catalog number
The FlexDrive
number is marked on the front of the unit, just below the Baldor logo. It is a good idea to look
for the catalog number (sometimes shown as ID/No: ) and write it in the space provided here:
Catalog number:
Installed at:
A description of a catalog number is shown here, using the example FDH1A05TB-RC23:
Meaning
FDH
FlexDrive
1
Requires an AC supply voltage of 115 Volts, 1Φ
A05
Continuous current rating of 5.0A
T
Built in AC power supply
Dynamic Brake with a built in transistor and
B
resistor (available on 2.5A and 5A models only)
R
Feedback option is a resolver
C
Option fitted: 1 CAN channel
2
Serial port type is combined RS232 / RS485
Customer's own 24VDC supply is required to
3
power the internal FlexDrive
Additional suffix letters may be used to indicate customer-specific builds.
* An external 24VDC supply will always be required to operate the enable input, digital inputs
and digital outputs on connector X3. See sections 4.3.1 to 4.3.5.
2-2 Introduction
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
II
, there are several things you should do immediately:
II
from the shipping container and remove all packing material. The
II
for external damage during shipment and report any damage to the
II
is to be stored for several weeks before use, be sure that it is stored in a location
II
is available with different current ratings and package sizes. The catalog
F_H______________-________
________________________
II
family
II
.
II
you received is the same as the catalog
II
.
II
logic
www.baldormotion.com
______
Date:
Alternatives
II
FPH=Flex+Drive
2=230V (1Φ or 3Φ);
4=230V-460V (3Φ)
A02=2.5A; A07=7.5A; A15=15A;
A20=20A; A27=27.5A
-
R= Requires external braking
resistor
E=Encoder (incremental);
D=EnDat (absolute encoder);
H=Hiperface (absolute encoder)
B=CAN & Auxiliary I/O
II
(Flex+Drive
only); D=DeviceNet;
P=Profibus DP;
N=No options specified
-
0= Internally generated 24VDC
supply*
MN1902
Advertisement
Table of Contents
