Table of Contents
Advertisement
Keyword
PRESETTRIGGERINPUT
PRODUCTCATALOGNUMBER
PRODUCTSERIALNUMBER
PROFILEMODE
PULSECOUNTER
PULSEDIRMODE
PULSEOUTX
RELAY
REMOTEADC *
REMOTEADCDELTA *
REMOTEIN *
REMOTEINBANK *
REMOTEINHIBITTIME *
REMOTEINX *
REMOTEMODE *
REMOTEOBJECT
REMOTEOUT *
REMOTEOUTBANK *
REMOTEOUTX *
REMOTEPDOIN *
REMOTEPDOOUT *
MN1902
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
To assign the input to be used as the preset index
trigger.
To return the catalog number of the controller.
To return the serial number of the controller.
To select the type of velocity profiler to use.
To return the value of the pulse input counter.
To set the control mode for the step (pulse) & direction
digital inputs.
To activate a digital output for a specified number of
milliseconds.
To enable or disable the relay.
To read the value of a remote analog input (ADC).
To control the rate of change on a remote analog input
before a REMOTEADC message is sent.
To read the state of all the digital inputs on a remote
CAN node.
To read the state of a bank of digital inputs on a remote
CAN node.
To set or read the CANopen PDO inhibit time.
To read the state of individual digital inputs from a
remote CAN node.
To control the update mode for a remote node.
To access the Object Dictionary of any CANopen node
present on the network.
To control the state of digital outputs on a remote CAN
node.
To read the state of a bank of digital outputs on a remote
CAN node.
To control the state of individual digital outputs on a
remote CAN node.
To request data from a node in the form of a PDO
message.
To force a Baldor controller node to transmit a variable
length PDO message with a specific COB-ID. The PDO
will contain up to 64 bits of data that can be passed in
the form of two 32-bit values.
Mint Keyword Summary C-17
www.baldormotion.com
Advertisement
Table of Contents
