Table of Contents
Advertisement
4.3 Digital I/O
The FlexDrive
8 general-purpose inputs on connector block X3
H
3 general-purpose outputs on connector block X3
H
1 relay / general-purpose output on connector block X3
H
A digital input can be used to support many typical input functions:
Error input
H
Reset input
H
Stop input
H
Forward limit
H
Reverse limit
H
Interrupts (controlled from Mint)
H
Regeneration resistor (Dynamic Brake) overtemperature input
H
PLC Task input conditions
H
General purpose use.
H
II
Flex+Drive
only:
Home input
H
Index selection and triggering for preset move types
H
DIN4 and DIN5 are fitted with Schmitt trigger devices and can be configured using Mint for
H
position capture of the axis or the master/auxiliary encoder positions. See section 4.3.4.
The main axis' fast input (assigned using the Mint keyword FASTSELECT) can also be
H
used as a trigger for point to point move types. See the Mint help file for details.
* Additional I/O is available on connector X12 if the CAN & Auxiliary I/O option is fitted. See
MN1908 CAN & Auxiliary I/O option for Flex+Drive
4-4 Input / Output
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
II
provides as standard: *
www.baldormotion.com
II
II
and MintDrive
.
MN1902
Advertisement
Table of Contents
