Table of Contents
Advertisement
Keyword
ADCMAX
ADCMIN
ADCMODE
ADCMONITOR
ADCOFFSET
ADCOFFSETTRIM
ADCTIMECONSTANT
ASYNCERRORPRESENT
Auto
AUTOHOMEMODE
AUTOSTARTMODE
AUXENCODER
AUXENCODERMODE
AUXENCODERROLLOVER
AUXENCODERSCALE
AUXENCODERSPEED
AUXENCODERVEL
AUXENCODERWRAP
AUXENCODERZEROENABLE
AUXENCODERZEROLATCHMODE
AUXENCODERZEROPOSITION
AUXENCODERZLATCH
C-2 Mint Keyword Summary
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Sets the upper analog limit value for the specified analog
input.
Sets the lower analog limit value for the specified analog
input.
To set the analog input mode.
Specifies the analog inputs that an axis will monitor for
analog limit checking.
To set the offset to be applied to an ADC input.
To zero (trim) the specified analog input.
To set the time constant of the low pass filter applied to
an ADC input.
To determine whether an asynchronous error is present.
To automatically execute a program on power-up.
To set the autohome mode for the specified
configuration.
To set the autostart mode for the specified configuration.
To set or read the auxiliary encoder input.
To make miscellaneous changes to the auxiliary
encoders.
To count the number of wraps of the auxiliary encoder
value.
To set or read the scale factor for the auxiliary encoder
input.
Specifies a (virtual) speed reference for the auxiliary
encoder.
To read the velocity of the auxiliary encoder input.
To set or read the encoder wrap range for the auxiliary
encoder input.
To re-enable Z pulse capturing on the auxiliary encoder
To control the latching mechanism for the auxiliary
encoder's Z latch.
To read the auxiliary encoder position at the last Z
capture.
To read the state of the auxiliary encoder's Z latch.
www.baldormotion.com
MN1902
Advertisement
Table of Contents
