Baldor FDH1A05TB-EN20 Installation Manual page 144

Keyword
MOTORFEEDBACKPROTOCOL-
ERROR
MOTORFEEDBACKPROTOCOL-
RETRIES
MOTORFEEDBACKSTATUS
MOTORFLUX
MOTORLINEARENCODER-
RESOLUTION
MOTORLINEARPOLEPITCH
MOTORLS
MOTOROVERLOADAREA
MOTOROVERLOADMODE
MOTORPEAKCURRENT
MOTORPEAKDURATION
MOTORPOLES
MOTORPOWERMEASURED
MOTORRATEDCURRENT
MOTORRESOLVEROFFSET
MOTORRS
MOTORSPECNUMBER
MOTORTEMPERATUREINPUT
MOTORTEMPERATURESWITCH
MOVEA *
MOVEBUFFERFREE *
MOVEBUFFERID *
MN1902
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
To read the type of feedback error when using a
Hiperface encoder.
To set or read the number of retries to attempt when an
error occurs on a Hiperface encoder.
To read the current status of the EnDat or Hiperface
encoder.
To set the motor's magnetic flux level, to allow the drive
to accurately calculate motor torque and compensate for
back-EMF.
To set the resolution of the encoder on a linear motor.
To set or read the distance between north poles on a
linear motor.
To set or read the motor leakage inductance.
Reads the extent of an overload condition.
To set or read the action taken in the event of a motor
overload condition.
To set or read the peak current rating of the motor.
To set or read the duration for which peak motor current
can be sustained.
To set or read the number of motor poles.
To read the instantaneous electrical power applied to the
motor.
To set or read the rated current of the motor.
To set the feedback alignment for a resolver motor.
To set the motor stator resistance.
To return the spec number of the motor.
To assign a digital input as the motor overtemperature
trip input.
To read the state of the motor overtemperature trip input.
To set up a positional move to an absolute position.
To return the number of free spaces in the move buffer
for the specified axis.
To attach or read back a 16-bit identifier from the move
buffer.
Mint Keyword Summary C-13
www.baldormotion.com