Table of Contents
Advertisement
Keyword
PHASESEARCHBANDWIDTH
PHASESEARCHCURRENT
PHASESEARCHMODE
PHASESEARCHSPEED
PHASESEARCHSTATUS
PHASESEARCHTRAVEL
PLATFORM
PLCACTION
PLCACTIONPARAMETER
PLCAUTOENABLE
PLCCONDITION
PLCDEFAULT
PLCENABLE
PLCENABLEACTION
PLCGEARFACTOR
PLCOPERATOR
PLCPARAMETER
PLCSTATUS
PLCTASK
PLCTASKSTATUS
PLCTIME
POS
POSACHIEVED
MN1902
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
To define the bandwidth used to design the 'debounce'
controller used during the initial alignment stage of the
phase search sequence.
To select amount of current applied to the motor during
the phase search sequence.
To turn on the 'debounce' controller used during the
initial alignment stage of the phase search sequence.
To select the speed of travel during the search sections
of a phase search sequence.
To determine whether commutation is aligned on an
axis.
To select the amount of travel during the search sections
of a phase search sequence.
To return the platform type.
To read the action assigned to a PLC Task channel.
To read the associated parameter for an action assigned
to a PLC Task channel.
To specify whether the PLC Task will be automatically
enabled on power-up.
To read a PLC test condition.
To reset the PLC Task table to default settings
To enable/disable the PLC Task.
To enable/disable individual PLC Task channels.
To set or read the gear factor used by the 'Fast Gear'
PLC action.
To read the operator for a PLC Task channel.
To read the associated parameter used by a PLC Task
channel's condition.
To read a bit pattern of active (true) PLC Task channels.
To set up PLC Task channels.
To read the current state of an individual PLC Task.
To set or read the frequency of a PLC Task.
To set or read the current axis position.
To indicate whether the axis is 'in position'.
Mint Keyword Summary C-15
www.baldormotion.com
Advertisement
Table of Contents
