Setting Model Dimensions; Repositioning Objects - Stratasys Objet1000 Plus User Manual

Objet1000 Plus User Guide
Setting Model You can change an object's dimensions by changing its size on the X-, Y-, and
Dimensions Z-axes, from the Dimensions group on the Model Settings ribbon.
Figure 5-41 Dimensions on the Model Settings ribbon
• If Uniform Scale is enabled, changing the object's dimension on one axis
• After changing a measurement, press Enter or click in another field in the
Note: You can change the height of the objects on the build tray only if this is
allowed by the Objet Studio settings (see "Positioning Objects on the Z-Axis" on
page 5-31).
The recommended minimum size for each object on the build tray is 800 mm
(on the X-axis) and 130 mm (on the Y-axis). Although smaller objects can be
printed, these minimum dimensions ensure good print quality.
Repositioning You can manually move and rotate an object on the build tray with the arrow
Objects keys, or by dragging it with the mouse.
To manually manipulate an object:
1. Select an object by clicking it on the build tray, or in the model tree pane.
2. Click
DOC-06810 Rev. B
affects the other dimensions, proportionately.
Dimensions group.
on the Model Toolbar, or on the Model Settings ribbon.
A frame appears around the object, and the cursor changes to indicate
that the object can be moved.
Figure 5-42 Manually moving an object
5 Using Objet Studio
5-35