Setting Model Dimensions; Repositioning Objects - Stratasys Objet260 Connex User Manual

Setting Model
Dimensions
Repositioning
Objects
DOC-06810 Rev. A
You can change an object's dimensions by changing its size on the X‐, Y‐,
and Z‐axes, from the Dimensions group on the Model Settings ribbon.
Figure 5-42: Dimensions on the Model Settings ribbon
•
If Uniform Scale is enabled, changing the object's dimension on one axis
affects the other dimensions, proportionately.
•
After changing a measurement, press Enter or click in another field in
the Dimensions group.
Note: You can change the height of the objects on the build tray only if this
is allowed by the Objet Studio settings (see "Positioning Objects on
the Z-Axis" on page 29).
The recommended minimum size for each object on the build tray is 800 mm
(on the X-axis) and 130 mm (on the Y-axis). Although smaller objects can be
printed, these minimum dimensions ensure good print quality.
You can manually move and rotate an object on the build tray with the
arrow keys, or by dragging it with the mouse.
To manually manipulate an object:
1. Select an object by clicking it on the build tray, or in the model tree
pane.
2. Click on the Model Toolbar, or on the Model Settings ribbon.
A frame appears around the object, and the cursor changes to indicate
that the object can be moved.
Figure 5-43: Manually moving an object
Objet1000 Plus User Guide
5–33