Safety Guidelines; Support Removal Items - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide

Safety Guidelines

Observe the following safety guidelines when using the soluble concentrate
and the tank:
• Follow the manufacturers documentation on tank operation and
safety. Understand how to properly and safely use the tank before
operation.
• Always wear safety goggles (indirectly vented and chemical splash
resistant).
• Use rubber gloves that can withstand the high solution
temperature and high alkaline solutions. (Gloves that are cuffed at
the elbow are recommended.)
• Follow your company and local regulatory statutes regarding
safety practices.
• Never place hands in a tank filled with solution and/or hot water.
• Never turn on power to the heater or ultrasonics without water/
solution in the tank.
• Always use a proper tool to remove parts from the tank. Plastic or
stainless steel removal tools are recommended that can withstand
the high solution temperature and high alkaline solution in the
tank.
• If using a basket, remove the entire basket from the tank before
removing parts.

Support Removal Items

The following support removal items are referenced in this guide:
• Safety goggles (indirectly vented and chemical splash resistant)
• Heat, alkaline, and water-resistant rubber safety gloves (cuffed at
the elbow is recommended)
• Pliers and/or chisel
• Power drill
• Tank
• WaterWorks soluble concentrate
• Water
C-7