Table of Contents
Advertisement
Stratasys J750/J735/J720 User Guide
Safety Guidelines
The following general guidelines, together with the instructions provided
throughout this user guide, ensure user safety while operating and maintaining
the system. If the system is not operated as specified, the user's safety
may be compromised.
Printer Installation
➢ Installation and removal of the printer should only be done by qualified service
➢ Connect the printer (and the UPS unit) to the electric outlet using a power
➢ The electric outlet should be easily accessible, near the printer.
➢ Never connect the power plug to an outlet that does not have a ground (earth)
➢ The following safety statement is followed by translations to Finish,
➢ Leave a minimum of 15 centimeters (6 inches) between ventilation openings
➢ For Japan: The power cable supplied is provided for connecting the printer
Printer Operation
➢ The printer should only be operated by persons trained by an authorized
➢ All persons operating or maintaining the printer should know the location of
➢ Keep fingers and other body parts clear of the printer when closing the cover.
➢ Never attempt to open the printer while it is working.
➢ Never override the interlock safety switch.
➢ If the interlock safety switch ever fails, do not use the printer.
➢ Several parts of the printer remain extremely hot even after it has stopped
DOC-08040 Rev. R
personnel.
cable that is safety-certified.
wire, and never disconnect the ground. Doing so might expose the operator
to serious danger from electric shock.
Norwegian, Swedish and Danish, as required by local regulations:
"The machine must be connected to a grounded power outlet."
❒ FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
❒ NO: Apparatet må tilkoples jordet stikkontakt.
❒ SE: Apparaten skall anslutas till jordat uttag.
❒ DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver
forbindelse til stikproppens jord.
and walls or other objects.
to the AC electric source. Do not use it with other equipment.
Stratasys representative.
first aid and emergency equipment and how to use it. Never block access
to this equipment.
operating. Avoid touching the UV lamps and the print block.
2 Safety
2-4
Hide quick links:
Advertisement
Table of Contents
