Removing And Replacing An Lff Hot-Plug Drive - HPE ProLiant ML30 Gen10 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Removing and replacing an LFF hot-plug drive

Removing and replacing an LFF hot-plug drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated CAUTION:
with either a component or a blank.
Procedure Procedure
1. Back up all server data on the drive.
2. Remove the front bezel .
3. Determine the status of the drive from the drive LED definitions .
4. Remove the drive.
To replace the component, reverse the removal procedure.
Caution: All bays must be populated Caution: All bays must be populated
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide 43