HPE ProLiant ML30 Gen10 Maintenance And Service Manual page 75

CAUTION: CAUTION:
The processor load plate and locking lever should close without resistance. Forcing to close these parts can damage the
processor and the socket. This damage might require replacing the system board.
3. Close the processor load plate (callout 1), and then engage the processor locking lever (callout 2).
4. Use an alcohol wipe to remove the existing thermal grease from the heatsink.
Allow the alcohol to evaporate before continuing.
5. Apply new thermal grease to the processor in the following pattern to ensure even distribution. Use the full contents of the thermal
grease syringe.
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide 75