Install The Front Bezel; Position The Tower Server For Operation - HPE ProLiant ML30 Gen10 Maintenance And Service Manual

4. Connect all peripheral cables to the server.
5. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
6. Power up the server .

Install the front bezel

Install the front bezel
Procedure Procedure
1. Insert the tabs on the bezel into the slots on the front chassis.
2. Close the front bezel.
3. Lock the front bezel.

Position the tower server for operation

Position the tower server for operation
Procedure Procedure
Return the server to an upright position.
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide 37