Table of Contents
Advertisement
After the server is running, you can update the firmware to install additional components. You can also update any components that
have been outdated since the server was manufactured.
To access Intelligent Provisioning:
Press F10 from the POST screen and enter either Intelligent Provisioning or HPE Rapid Setup Software.
From the iLO web interface using Lifecycle Management. Lifecycle Management allows you to access Intelligent Provisioning
without rebooting your server.
Intelligent Provisioning operation
Intelligent Provisioning operation
NOTE:
NOTE:
Intelligent Provisioning 3.62 and later requires iLO firmware version 2.44 or later.
Intelligent Provisioning includes the following components:
Critical boot drivers
Active Health System (AHS)
Erase Utility
Deployment Settings
IMPORTANT:
IMPORTANT:
Although your server is preloaded with firmware and drivers, Hewlett Packard Enterprise recommends updating
the firmware upon initial setup. Also, downloading and updating the latest version of Intelligent Provisioning
ensures the latest supported features are available.
For ProLiant servers, firmware is updated using the Intelligent Provisioning Firmware Update utility.
Do not update firmware if the version you are currently running is required for compatibility.
NOTE:
NOTE:
Intelligent Provisioning does not function within multihomed configurations. A multihomed host is one that is
connected to two or more networks or has two or more IP addresses.
Intelligent Provisioning provides installation help for the following operating systems:
Microsoft Windows Server
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
VMware ESXi/vSphere Custom Image
ClearOS
Not all versions of an OS are supported. For information about specific versions of a supported operating system, see the OS Support
Matrix on the Hewlett Packard Enterprise website (https://www.hpe.com/info/ossupport
HPE Insight Remote Support
HPE Insight Remote Support
Hewlett Packard Enterprise strongly recommends that you register your device for remote support to enable enhanced delivery of your
Hewlett Packard Enterprise warranty, HPE support services, or Hewlett Packard Enterprise contractual support agreement. Insight
Remote Support supplements your monitoring continuously to ensure maximum system availability by providing intelligent event
diagnosis, and automatic, secure submission of hardware event notifications to Hewlett Packard Enterprise, which will initiate a fast and
accurate resolution, based on your product's service level. Notifications can be sent to your authorized Hewlett Packard Enterprise
Channel Partner for onsite service, if configured and available in your country.
https://www.hpe.com/info/ossupport).
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide
97
Advertisement
Table of Contents
