Replacing a processor
Replacing a processor
CAUTION: Failure to completely open the processor locking lever prevents the processor from seating during
CAUTION:
installation.
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Torque screwdriver
Alcohol wipe
1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
Procedure
Procedure
1. Do not touch the socket contacts or the bottom of the processor.
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide
73