Table of Contents
Advertisement
c. Completely loosen all screws in the same sequence.
d. Remove the heatsink from the processor backplate.
17. Open the processor load plate:
a. Push the processor locking lever down to unclip it, and then pivot it to the vertical position (callout 1).
b. Open the processor load plate (callout 2).
CAUTION:
CAUTION:
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED. Any
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED.
damage to them might require replacing the system board.
18. Do not touch the socket contacts or the bottom of the processor.
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide
85
Advertisement
Table of Contents
