Note:
Section N will provide steps to save management list logs on the USB (Memory)
flash driver or Section O will provide steps print vCare Communication log.
N. Saving vCare Communication Log onto USB (Memory) Flash drive
1. Insert the USB (Memory) Flash drive in the top slot on right hand side of
C8000 monitor.
2. Press Utility\Counter -> Stop -> 00 -> Stop -> 01 to enter Service Mode.
3. In [Service mode], select [List Output].
NOTE:
If the "Communication Log List" button does not appear, in [Service Mode] >
select [System Setting] > [Software DIPSW Setting] and set [30-1] to On(1).
Konica Minolta bizhub PRESS C8000 Main Body bizhub vCare HTTP Setup Guide
Page 18 of 21