Display Vlan - H3C IE4300 Command Reference Manual

Field
Protocol
Primary IP
Related commands
reset counters interface vlan-interface

display vlan

Use
display vlan
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Specifies a VLAN by its ID in the range of 1 to 4094.
vlan-id1
vlan-id1 to vlan-id2
arguments are in the range of 1 to 4094. The value for the
greater than the value for the
: Specifies all VLANs except the reserved VLANs.
all
dynamic : Specifies dynamic VLANs. If you specify this keyword, the command displays the total
number of dynamic VLANs and each dynamic VLAN ID. Dynamic VLANs are generated through
MVRP or assigned by a RADIUS server.
: Specifies reserved VLANs. Protocol modules determine which VLANs are reserved
reserved
according to function implementation. The reserved VLANs provide services for protocol modules.
You cannot configure reserved VLANs.
: Specifies static VLANs. If you specify this keyword, the command displays the total
static
number of static VLANs and each static VLAN ID. Static VLANs are manually created.
Examples
# Display information about VLAN 2.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Description
To see the primary interface, use the
interface-backup state
Data link layer protocol state of the interface:
•
UP—The data link layer protocol state of the interface is up.
•
DOWN—The data link layer protocol state of the interface is
down.
•
UP(s)—The data link layer protocol of the interface is up, but
the link is an on-demand link or does not exist. The (s)
attribute represents the spoofing flag.
Primary IP address of the interface.
to display VLAN information.
: Specifies a VLAN ID range. Both the
argument.
vlan-id1
5
display
command.
and the
vlan-id1
argument must be equal to or
vlan-id2
vlan-id2