Stp Priority - H3C IE4300 Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
: Specifies all MSTIs or VLANs.
all
instance instance-list
specifies an MSTI or a range of MSTIs in the form of
value for
instance-id2
value range for the
vlan vlan-id-list
specifies a VLAN or a range of VLANs in the form of
vlan-id2
argument is 1 to 4094.
vlan-id
Examples
# In MSTP mode, enable outputting port state transition information for MSTI 2.
<Sysname> system-view
[Sysname] stp port-log instance 2
%Aug 16 00:49:41:856 2011 Sysname STP/3/STP_DISCARDING: Instance 2's port
GigabitEthernet1/0/1 has been set to discarding state.
%Aug 16 00:49:41:856 2011 Sysname STP/3/STP_FORWARDING: Instance 2's port
GigabitEthernet1/0/2 has been set to forwarding state.
The output shows that GigabitEthernet 1/0/1 in MSTI 2 transited to the discarding state and
GigabitEthernet 1/0/2 in MSTI 2 transited to the forwarding state.
# In PVST mode, enable outputting port state transition information for VLAN 1 through VLAN 4094.
<Sysname> system-view
[Sysname] stp port-log vlan 1 to 4094
%Aug 16 00:49:41:856 2006 Sysname STP/3/STP_DISCARDING: VLAN 2's GigabitEthernet1/0/1 has
been set to discarding state.
%Aug 16 00:49:41:856 2006 Sysname STP/3/STP_FORWARDING: VLAN 2's GigabitEthernet1/0/2 has
been set to forwarding state.
The output shows that GigabitEthernet 1/0/1 in VLAN 2 transited to the discarding state and
GigabitEthernet 1/0/2 in VLAN 2 transited to the forwarding state.

stp priority

Use
stp priority
Use
undo stp priority
Syntax
stp [ instance instance-list | vlan vlan-id-list ] priority priority
undo stp [ instance instance-list | vlan vlan-id-list ] priority
Default
The device priority is 32768.
: Specifies a space-separated list of up to 10 MSTI items. Each item
must be equal to or greater than the value for
instance-id
: Specifies a space-separated list of up to 10 VLAN items. Each item
must be equal to or greater than the value for
to set the priority of the device.
to restore the default.
instance-id1 [ to instance-id2 ]
argument is 0 to 4094, and the value 0 represents the CIST.
vlan-id1 [ to vlan-id2 ]
42
instance-id1
. The value range for the
vlan-id1
. The
. The
. The value for