Internal Access; To Attach The Wrist Strap - Sun Microsystems Netra t 1120 Service Manual

7
C H A P T E R

Internal Access

This chapter contains procedures to attach the wrist strap and to remove and replace
the system top access cover
7.1

To Attach the Wrist Strap

Caution – Wear an antistatic wrist strap and use an ESD-protected mat when
!
handling components. When servicing or removing system unit components, use a
wrist strap with a 10mm press stud connection and attach the wrist strap to the
press stud at the front or rear of the chassis. This should be performed before the top
cover is removed.
7-1