External Network And Management Connections; Ethernet Ports; Console And Ethernet Management Ports; Internal Hardware Components - Sun Microsystems Sun N2000 Series Introduction Manual

External network and management
connections

Ethernet ports

Ethernet 10/100BASE-T ports require standard unshielded twisted-pair/shielded
twisted-pair (UTP/STP) network cable, Category 5 or 5E, with RJ-45
8-pin modular connectors.
Gigabit Ethernet ports require small form factor (SFF) pluggable LC or MT-RJ
fiber-optic connectors on multimode fiber-optic cable.

Console and Ethernet management ports

The console port requires a standard EIA-232 (RS-232) data terminal equipment
(DTE) crossover serial cable with a DB-9 connector.
The 10/100-Mbps management port requires a standard UTP/STP network cable,
Category 5 or 5E, with an RJ-45 8-pin modular connector.

Internal hardware components

Sun N2120 and N2040 system platforms use the following internal hardware
components:
System board
■
Function card
■
System fan module
■
System power supply
■
Chapter 1 N2000 Series overview 3