11
11.3 Internal Access
11.3.1 Front Bezel
11-2
The system has a front bezel that must be removed to access the SCSI tray.
To remove the front bezel:
1. Grasp the front bezel on both sides near the center.
Place your thumbs on top of the front bezel and place your other fingers at
the slight indentations under the front bezel for leverage.
2. Pull the front bezel straight out toward you and set it aside.
Press down on the top of the bezel as you pull it toward you. See
Figure 11-1.
Figure 11-1 Removing the Front Bezel
Ultra Enterprise 3000 System Manual—November 1996