Table of Contents
Advertisement
6. Microsoft Windows will automatically detect the new detector and launch the
Found New Hardware Wizard. Use the wizard to install the detector as
described below.
a. If asked whether Windows can connect to Windows Update to search for
software, select No, not this time.
b. Accept the default option (Install the software automatically) and click
Next >.
c. When the hardware wizard reports that the software for the detector has
been installed, click Finish.
NOTE If Windows fails to detect the Dionex VWD, refer to
B.11 Setting Up the Chromatography Software
This section provides brief instructions for setting up Chromeleon 7 or
Chromeleon 6.8 software. For details about any of these steps, refer to the
Chromeleon Help.
B.11.1 Chromeleon 7: Assigning the Dionex VWD to an
Instrument
After the Windows Found New Hardware Wizard is finished (see
Section
Chromeleon 7 instrument.
1. Click Start on the taskbar and select All Programs > Chromeleon 7
> Services Manager to open the Services Manager. Click Start
Instrument Controller.
2. Click Configure Instruments to start the Instrument Configuration
program.
3. If necessary, click the plus sign beside the instrument controller name
to display the items underneath.
4. Select the instrument to which the Dionex VWD will be assigned, or
create a new instrument (select Edit > Add Instrument).
Doc. 065377-01 1/12
Section 4.9
for troubleshooting help.
B.10), follow the steps below to add the Dionex VWD to a
B • Installation
99
Advertisement
Table of Contents
