Thermo Scientific Dionex ICS Series Operator's Manual page 110

Dionex VWD Operator's Manual
6. Under Devices, select VWD Variable Wavelength Detector (ICS)
(see
7. The Properties dialog box for the Dionex VWD appears. Check that
the default settings are correct for your system and select other
settings, if needed (see
box.
8. Save the configuration (select File > Save Installation).
102
Figure B-15) and click OK.
Figure B-15. Adding the Dionex VWD to a Timebase
Section B.11.3). Click OK to close the dialog
Doc. 065377-01 1/12