Table of Contents
Advertisement
Dionex VWD Operator's Manual
path. If necessary, see
information.
Select one of the following methods to perform the equilibration tasks:
•
Select operating commands and parameters directly from the Chromeleon 7
ePanel Set or the Chromeleon 6.8 Control panel. See
about direct control.
•
Create and run an equilibration instrument method or program to automate the
process. See
•
If you are running Chromeleon, you can use the Smart Startup feature to
automate system startup and equilibration. In Chromeleon 7, you first create
an instrument method from which the Smart Startup settings are derived. In
Chromeleon 6.8, you can use the Smart Startup Wizard to create a Smart
Startup program. Refer to the Chromeleon Help for details.
3.3
Direct Control
With direct control, you select operating commands and parameters from the
following locations:
•
Chromeleon 7 ePanel Sets or the Command window
–or–
•
Chromeleon 6.8 Control panels or the Commands dialog box
Direct control commands are executed as soon as they are entered. Most routine
direct control functions can be performed from ePanels or Control panels.
For other functions, you can use the Command window or Commands dialog box.
These provide access to all the available commands and properties for the Dionex
VWD, as well as commands for other devices in the instrument or timebase,
respectively.
To issue direct control commands to the Dionex VWD:
1. Open the ePanel Set (see
click the tab for the detector.
2. Use the controls (buttons, sliders, etc.) on the panel to issue commands.
3. If the function you want to perform is not available from the panel, open the
Command window or Commands dialog box (see the instructions below).
30
Section 4.5
Section 3.4
for details about automated control.
Section
3.1.2) or panel tabset (see
and
Section 4.6
for troubleshooting
Section 3.3
for details
Section
3.1.3) and
Doc. 065377-01 1/12
Advertisement
Table of Contents
