Thermo Scientific Dionex ICS Series Operator's Manual page 51

Dionex VWD-Related Audit Trail Error Message
Error opening VWD-xxx@USB-xxxx – The System
cannot find the file specified.
Error reading from VWD-xxxx@USB-xxxx.
Error issuing control request to VWDxxx@USB-xxxxx.
Error reading from VWD-xxxx@USB-xxxxx Data error
(cyclic redundancy check).
Filter calibration failed.
Lamp spectral range, wavelength mismatch.
A leak has been detected.
Low lamp intensity.
Next qualification of this module is due in x day(s) (due
date is [date]).
Next qualification of this module was due on [date].
Allowing x more grace day(s).
Next qualification of this module is overdue (due date
was [date]).
Next qualification of this module is overdue (due date
was [date]). Module may no longer be used.
Next service of this module is due in x day(s) (due date
is [date]).
Next service of this module is overdue (due date was
[date]).
Unsuitable flow cell position.
UV lamp ignition failed.
UV lamp intensity low.
VIS lamp ignition failed.
VIS lamp intensity low.
VWD configured but not present. Please check
configuration using the Instrument Configuration
program.
VWD configured but not present. Please check
configuration using the Server Configuration program.
Doc. 065377-01 1/12
4 • Troubleshooting
Default See
Severity Level
Abort page 47
Abort page 47
Abort page 47
Abort page 48
Abort page 48
Error page 48
Warning page 49
Warning page 49
Warning page 50
Warning page 50
Warning page 50
Error page 50
Warning page 50
Error page 50
Warning page 51
Abort page 51
Warning page 51
Abort page 52
Warning page 52
Warning page 52
Warning page 52
43