Table of Contents
Advertisement
Dionex VWD Operator's Manual
Detector Tab Page
The Detector tab page (see
VWD installed (1 Channel or 4 Channels) and the device name (UV)
used to identify the detector in the configuration and in the Chromeleon
client. Thermo Scientific recommends retaining the default device name
because the name is linked to various controls in the Chromeleon client. If
you change the name, the controls will no longer function.
Select the corresponding check box for each option currently installed in
the detector: UV Lamp, VIS Lamp, and DAC Board.
Figure B-16. Dionex VWD Configuration Properties: Detector Tab Page
Signals Tab Page
The Signals tab page lists the signals that the detector can record. The
signal type and name of each signal is displayed. To allow raw data
collection for a signal, select the Enabled check box next to its name. If
the check box is cleared, the detector cannot collect raw data for the
signal.
104
Figure
B-16) displays the type of Dionex
Doc. 065377-01 1/12
Advertisement
Table of Contents
