Dionex VWD Operator's Manual
b. Select View > Default Panel Tabset or click the corresponding
c. To display the Dionex VWD Control panel, select the VWD tab
Figure 3-2. Example Dionex VWD Control Panel in Chromeleon 6.8
d. Verify that the Connected check box is selected. If it is not, click
28
toolbar button
to display the panel tabset.
on the panel tabset (see
the box to connect the Dionex VWD to Chromeleon 6.8.
NOTE After starting Chromeleon 6.8 and connecting
to the Control panel, the
detector's status bar is blue.
Figure
3-2).
LED on the
Connected
Doc. 065377-01 1/12