Rear Panel; Main Power Switch, Fuse Cartridge, And Power Receptacle - Thermo Scientific Dionex ICS Series Operator's Manual

Dionex VWD Operator's Manual
2.4

Rear Panel

Figure 2-5 illustrates the rear panel of the Dionex VWD.
1
2
3
2.4.1 Main Power Switch, Fuse Cartridge, and Power
Receptacle
The power switch on the rear panel is the main power switch for the
Dionex VWD. Turn on the main power switch before initial operation and
leave it on unless instructed to turn it off (for example, before performing
a service procedure).
16
1
Main Power Switch, Fuse
Cartridge, Power Receptacle
Digital I/O Ports
USB Receptacle
Figure 2-5. Dionex VWD Rear Panel
(Analog Output Connectors not Installed)
NOTE For routine on/off control, use the power button
on the front of the Dionex VWD (see
Figure 2-2). To turn off the detector, press and
hold the power button for 2 seconds.
2 3 4
4
Analog Outputs (optional)
Tubing Chase
5
6
Drain Port
5
6
Doc. 065377-01 1/12