Dionex VWD Operator's Manual
Figure 2-7
Figure 2-7. Example Dionex VWD Control Panel in Chromeleon 6.8
Two modes of software control are available: direct control and
automated control.
•
With direct control, you select operating parameters and commands
from the Chromeleon 7 Command window and ePanel or the
Chromeleon 6.8 Commands dialog box and Control panel. Direct
control commands are executed as soon as they are entered. See
Section 3.3
•
With automated control, you create a predefined list of commands
and parameters (called an instrument method in Chromeleon 7 or a
22
shows the Dionex VWD Control panel in Chromeleon 6.8.
for details about direct control.
NOTE To open the Chromeleon 7 Command window,
press F8 or click Command on the Instrument
toolbar above the ePanel Set. To open the
Chromeleon 6.8 Commands dialog box, press
F8 or click Control > Command.
Doc. 065377-01 1/12