Thermo Scientific Dionex ICS Series Operator's Manual page 93

Installing a Flow Cell
NOTE Contacts for the flow cell identification chip are located
Identification
Chip Contacts
(Do Not Touch)
Figure B-3. Rear of Flow Cell with Identification Chip Contacts
Figure B-4
Cell Inlet
and Outlet
Line Unions
Doc. 065377-01 1/12
on the rear of the flow cell (see
optimum performance of the chip, do not touch the
contacts.
shows the flow cell after installation is complete.
Figure B-4. Flow Cell Installed
B • Installation
Figure B-3). To ensure
Flow Cell
Inlet
Flow Cell
Outlet
85