Dionex VWD Operator's Manual
To connect the Dionex VWD directly to the PC:
1. Plug the "A" connector of the USB cable (P/N 063246) into the USB
port on the PC (see
2. Plug the "B" connector of the USB cable into the USB receptacle on
the Dionex VWD rear panel.
VWD
Plug the
USB cable's
connector
into the USB
receptacle on the VWD.
Figure B-11. Dionex VWD Connected Directly to the Chromeleon PC
94
Figure
B-11).
USB Cable
(P/N 063246)
B
"B"
A
PC
Plug the
USB cable's
"A"
connector
into
the
USB
port on the PC.
Doc. 065377-01 1/12