Dionex VWD Operator's Manual
5. Select Edit > Add Module or right-click and select the command on
the context menu.
The Add module to instrument dialog box appears.
6. Under Manufacturers, select IC: ICS-5000 Systems or IC:
Modules.
7. Under Modules, select VWD Variable Wavelength Detector (ICS)
(see
8. The Properties dialog box for the Dionex VWD appears. Check that
the default settings are correct for your system and select other
settings, if needed (see
box.
9. Save the configuration (select File > Save Installation).
100
Figure
B-14) and click OK.
Figure B-14. Adding the Dionex VWD to an Instrument
Section
B.11.3). Click OK to close the dialog
Doc. 065377-01 1/12