Table of Contents
Advertisement
Dionex VWD Operator's Manual
•
The front cover provides access to the interior components of the Dionex
VWD. To remove the cover, grasp the cover by the sides and pull it straight
off.
•
The status bar provides LEDs (light emitting diodes) that indicate the status of
several detector functions (see
CONNECTED
Button/LED Label
CONNECTED
ALARM
DEUTERIUM – UV
TUNGSTEN – VIS
POWER
10
Figure
DEUTERIUM - UV
ALARM
Figure 2-2. Dionex VWD Status Bar
If the LED is on ...
The Dionex VWD is connected to a Chromeleon 7 instrument or
a Chromeleon 6.8 timebase.
A problem has occurred (for example, a leak). Check the
Chromeleon Audit Trail for the cause.
The deuterium lamp is on.
The tungsten lamp is on.
The Dionex VWD power is on.
2-2).
TUNGSTEN - VIS
POWER
Doc. 065377-01 1/12
Advertisement
Table of Contents
