Red Offset (Roo); Rgb Gain/Offset Reset (Gor) - Christie G Series Application Manual

Subcode
None
Read/Write
Yes
Examples
Command
(ROG50)

Red Offset (ROO)

Use this command to adjust the red offset of an image. Adjusting this setting also affects the black
and white components of an image. This setting can only be applied to VGA or component signals.
The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(ROO50)

RGB Gain/Offset Reset (GOR)

Use this command to reset red, green, blue gain and offset values.
Subcode
None
Read/Write
Yes
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the red gain value to 50.
Sets red offset to 50.
Description
Description
Commands
27