NOTE: When assembling carburetors, keep in mind the following:
•
Maintain cleanliness at all times, especially
watching for paint chips caused by cover re
moval.
•
Proper needle valve control arm level, set to
specification.
•
Do not apply pressure on top of the needle
valve assembly during adjustment.
•
Use Loctite™ 242 to prevent corrosion of car
buretor mounting bolts and diaphragm cover.
•
Manually synchronize carburetors (see pro
cedure this section).
1.
Install O-ring and anti-siphon valves with plates.
FUEL SYSTEM/CARBURETION
Carburetor Assembly
2.
Install bypass port cover.
3.
Install screen and new O-rings on inlet needle seat.
Lubricate O-rings with Polaris Premium 2 Cycle
Lubricant.
Polaris Premium 2 Cycle Lubricant
PN 2871098-Gallon
PN 2872097 - Quart
Polaris Sales Inc.
3.33
3/00