Polaris Virage TX 2000 Service Manual page 252

ELECTRICAL
Ignition System Testing - Virage TX / SLX / Pro 1200 / Genesis
PVL Ignition Troubleshooting, Cont.
d.Connect the positive test lead to the purple
wire:
SPECIFICATION: 5.5 ohms (III. 5)
e. Connect the positive meter lead to the follow
ing wires (one at a time).
SPECIFICATIONS: (III. 6)
RED/PURPLE: OPEN
GRAY: OPEN
Open readings are correct for Tektronix
DMM 155 meter. Other meters may
show a very high Meg-ohm reading.
f. Connect the negative test lead of the ohm
meter to the gray wire coming from the stator
and repeat step e.
Stator Purple Wire
Stator Black Wire
II. 5
Red/Purple and Gray wre
(one at a time)
Brown, Red, Green, andBlue
(one at a time)
Polaris Sales Inc.
7.29
3/00