Polaris Virage TX 2000 Service Manual page 254

ELECTRICAL
Ignition Coil Identification - Virage TX / SLX / Pro 1200 / Genesis
Virage TX / SLX / Pro 1200 / Genesis Ignition
Coils
NOTE: The ignition system used on 1200 carbureted
personal watercraft engines are sequential firing types.
Ignition spark on each cylinder occurs independently of
the others using a separate trigger pulse from each Hall
Effect sensor in the stator.
On models with sequential firing, the high tension leads
(spark plug wires) must be installed on their respective
cylinders or the engine will not run properly.
t
Front
Air Box
1 3 2
Bulkhead Mounted Electrical Box
1550Q Coil Pack
Wire Sequence
When replacing a CDI box on a Virage TX, SLX, Pro 1200, or Genesis, it is very important
to check timing. A new CDI box may be programmed slightly different than the one be
ing replaced, causing ignition timing to be advanced or retarded too far.
Polaris Sales Inc.
7.31
3/00