Polaris Virage TX 2000 Service Manual page 265

ELECTRICAL
Multi-Function Instrument
DISPLAY: Pressing the DISPLAY button toggles the MFI between NORMAL DISPLAY mode and DIGITAL DIS
PLAY mode. The lower display will show VOLTS/DISTANCE/HOURS when in NORMAL mode, and real-time
digital RPM and SPEED when in DIGITAL mode. When first entering DIGITAL DISPLAY mode, the MFI briefly
displays the last recorded peak RPM and SPEED. While the peak values are being displayed, holding the DIS
PLAY button for several seconds will reset the peak values. Pressing the DISPLAY button while in DIGITAL DIS
PLAY mode toggles the display back to the standard VOLT/DISTANCE/HOURS display.
ENGLISH/METRIC: To change units between English and metric, press and hold the 1/6 button and the 2/7 but
ton simultaneously for several seconds. When in metric mode, "km" appears in the distance meter, and the
"MTRS" icon will illuminate in the depth gauge (where applicable) if activated.
WARNING INDICATIONS:
• LOW FUEL -1/8 tank or less of fuel remaining
• LOW OIL -1/4 tank or less of oil remaining
• ENGINE OVERHEAT - overheated engine
• LOW BATTERY - battery voltage below 10.9 volts
• REVERSE - indicates reverse has been initiated
• CHECK ENGINE (DFI only) - indicates a warning condition from the DFI engine control
3/00 7.42 Polaris Sales Inc.