Polaris Virage TX 2000 Service Manual page 138

ENGINE
Assembly - Polaris Engine
7 . Install bearing retainer circlip with end gap facing
directly upward as shown.
8 . Apply grease to seal lip and install seal with lip and
spring facing inward toward crankshaft.
9 . Apply a light film of grease and install O-ring and
seal collar, being careful not to dislodge spring on
seal during installation of collar.
^i^^^^Slt^:^r^:/-':
10.Install seal retaining circlip with end gap facing
upward. The seal retainer circlip is plated to resist
corrosion.
Polaris Sales Inc.
4.27
3/00