Polaris Virage TX 2000 Service Manual page 320

Service and Utilities Menu -Option 3 - Service EMM
The service EMM program will copy the faulty
EMM's software on your laptop, and then transfer
this information to the replacement EMM.
A WARNING
DO NOT TURN OFF YOU LAPTOP WHEN PER
FORMING THE OPERATION.
1. Verify that the lanyard is connected to the
watercraft.
DIAGNOSTIC SOFTWARE
Service EMM
2. Type "3" on the Service Utilities Menu to
access the Service EMM function.
3. Download the damaged EMM's information
by pressing any key on the laptop. Press
"ESC" to cancel and to return to the menu
selections.
Year 2000 / Serial Numbers / (White
Labels)
Year 2000 EMM Serial Number
/Warning (Yellow Label)
4. Remove the lanyard and install the new
EMM.
5. With the new EMM installed, re-attach the
lanyard.
6. Connect the laptop to the new EMM
7. Press any key on the laptop to upload the
copied information to the new EMM. Press
"ESC" to cancel the entire operation.
8. When the program is finished loading the
replacement EMM, the screen will display:
"REPLACEMENT EMM HAS BEEN
SUCCESSFULLY INITIALIZED!" Press any
key to return to the Service Utilities Main
Menu screen.
NOTE: When repairing an EMM, perform all steps
correctly and completely. EMM information cannot
be saved in your laptop.
INFORMATION COPIED SUCCESSFULLY!
* REMOVE LANYARD
* INSTALL SERVICE REPLACEMENT EMM
* RE-ATTACH LANYARD
PRESS ANY KEY TO COPY INFORMATION TO
NEW <ESC> TO CANCEL.
REPLACEMENT EMM HAS BEEN SUCCESSFULLY
INITIALIZED!
PRESS ANY KEY TO RETURN TO MENU