Polaris Virage TX 2000 Service Manual page 304

DIAGNOSTIC SOFTWARE
Error Messages
If the laptop displays this error screen, there are
three possible causes:
Not enough DOS memory available.
To correct this, press the "ESCAPE" key to end
the program. Check computer memory by typ
ing MEM and pressing the "ENTER" key at the
DOS prompt. The largest program size must
be more than 400k (400,000). If not, reconfi
gure the computerto make more memory avail
able.
Attempting to start the program out
side of the PODIAG directory.
Change to the PODIAG directory before start
ing the program.
C:\PODIAG>podiag
40
DATABASE ERROR - RESTART PROGRAM IF
ERROR OCCURS AGAIN, REINSTALL PRO
GRAM FROM THE DISKETTE
Damaged or erased program file.
Reinstall the program. See the section titled
"Installing and Starting the Program" in this
chapter.
9.7
Polaris Sales Inc.