Polaris Virage TX 2000 Service Manual page 259

ELECTRICAL
Ignition Timing Adjustment
Ignition Point Adjustment Unit
1. Set timing as indicated above.
2. Remove battery cover and exhaust hoses as
required to access the battery and electrical box.
3. Remove negative (-) cable from battery terminal.
4. Carefully open the electrical box. Remove the LR
module and the CDI.
5. With the CDI box accessible, attach the harness
of the Ignition Point Adjustment Unit, (PN
2872290), to the serial port on the CDI.
6. Reassemble the electrical box completely.
Reconnect the battery and exhaust hoses.
7. Remove the timing cover plug.
3/00 7.36
Polaris Sales Inc.