Polaris Virage TX 2000 Service Manual page 148

ENGINE
Assembly - Polaris Engines
50. Lightly grease ends of starter drive and install in
starter housing.
Polaris Premium Starter Grease
PN 2871460(2oz. tube)
51 .Install flywheel key in crankshaft. Apply a small
amount of Loctite ™ 262 (red) to taper and 242 (blue)
to threads of the crankshaft.
52 . Install flywheel using puller bolts to hold flywheel.
Failure to do so may result in personal injury. Install
washer and nut. Torque to specification.
NOTE: Always check the condition and tightness of
the two timing screws on the flywheel (Carbu
reted Models).
Flywheel Nut Torque-
90 ft. lbs. (124.4 Nm)
Flywheel Holder Tool PN
(Carb. models) '
'229
53 .Check for proper clearance between stator wires,
harness, and flywheel ring gear.
Polaris Sales Inc.
4.37
3/00