Polaris Virage TX 2000 Service Manual page 318

DIAGNOSTIC SOFTWARE
Service Reports
2) Save Current EMM Report
Type "2" from the Service Report Menu to save a
report about the engine you are connected to. You
will be asked to enter a file name or select a file
name from a list.
NOTE: Polaris recommends for simplicity, you en
ter the universal manufacture ID and the serial
number for each watercraft you are connected to.
An example would be: PLE12345. The file
name can be no longer than eight characters
and contain no special characters. After typing
the file name, hit "ENTER".
3) Print
Type "3" on the Service Report Menu to print a re
port about the engine you are currently connected
to. After typing in the file name, hit "ENTER" key.
Press the "ESC" key to return to the Service Re
port Menu.
4) View Saved Report
Type "4" on the Service Report Menu to a view a
previously saved report. You will be asked to enter
a file name or select a file name from a list. Use the
"Arrow" keys to move through the list of files. This
option will allow you to view files about an engine
that is not currently connected to your laptop.
Press the "ESC" to return to the Service Report
Menu.
File name:
PLE12345
PLE54321
5) Print Saved Report
Type "5" on the Service Report Menu to print a pre
viously saved report. You will be asked to enter a
file name or select a file name from a list. Use this
option to print information on an engine that is not
currently connected to your laptop. Press the
"ESC" key to return to the Service Report Menu.
6) Return to Service Utilities Menu
Type "6" on the Service Report Menu to return to
the Service Utilities Menu.
3/00
9.21
Polaris Sales Inc.