Cylinder Disassembly - Attachment Rotation Cylinder - Terex Genie GTH-4017 EX Service Manual

Section 7 - Repair Procedures
015
TABLE
Procedure: Cylinder disassembly
Attachment rotation cylinder
8 Remove the screw fixing the cylinder pin (bottom
side) using two 17 mm wrenches.
9 Knock out and extract the pin using a plug of
soft material (aluminium, copper, wood, etc.).
10 Secure the cylinder to the bridge crane with a
textile bridle, then slightly raise the boom to set
the cylinder free.
11 Remove the cylinder using the bridge crane.
46
GTH-4017EX GTH-4514EX GTH-4013 EX
9
8
November 2008
015
Table:
GTH-4017EX
GTH-4514EX
GTH-4013EX
Document 57.0009.0427