Change The Oil In The Reduction Gears, Differential Gears And Power Divider Reduction Gear - Terex Genie GTH-4017 EX Service Manual

Section 4 - Maintenance Procedures
TABLE C
4.5 TABLE C PROCEDURES
C-1 CHANGE THE OIL IN THE REDUCTION GEARS,
DIFFERENTIAL GEARS AND POWER DIVIDER
REDUCTION GEAR
To change the oil in the reduction gears:
- Stop the machine on a level ground and ensure the
parking brake is engaged and plug A finds on the
vertical axis.
PROTECT THE
ENVIRONMENT
Place a container of suitable size under the plug for
oil leaks.
- Remove the plug A and allow the oil to flow from the
reduction entirely.
- Rotate the wheel by 90° until the plug is on the hori-
zontal axis.
- Add the oil through hole A.
- Refit the plug A.
Recommended oil:
- TRACTORENAULT THFI 208 LF SAE 80W
API GL-4 / FORD M2C 86 B / Massey Ferguson M
1135
A
32
A
GTH-4017EX GTH-4514EX GTH-4013EX
To change the oil in the front and rear differential
gears:
- Stop the machine on a level ground and ensure the
parking brake is engaged.
PROTECT THE
ENVIRONMENT
Place a container of suitable size under the plug for
oil leaks.
- Remove the plugs C, A and B, and allow the oil to
flow entirely.
- Refit the plug C.
- Add the oil through hole B until it is level with hole
A.
- Refit the plugs A-B.
Recommended oil:
- TRACTORENAULT THFI 208 LF SAE 80W
API GL-4 / FORD M2C 86 B / Massey Ferguson M
1135
B
C
November 2008
A
Document 57.0009.0427