Terex Genie GTH-4017 EX Service Manual page 134

Section 5 - Problems-Causes-Solutions
- -
PROBLEMS CAUSES SOLUTIONS
Problems
The light warning of a low engine
oil pressure doesn't work.
The engine cooling
temperature indicator
doesn't work.
The engine water thermometer
doesn't work.
The hydraulic oil thermometer
doesn't work.
The fuel gauge doesn't work.
8
Causes
Pressure switch for low engine oil
pressure damaged.
X1 dashboard indicator light.
Problem of the wiring line.
water
Temperature sensing bulbs B13
light
(GTH 4013EX) B14 (GTH 4017EX - GTH
4514EX) damaged.
X1 dashboard indicator light.
Problem of the wiring line.
Engine oil thermometer on dashboard
damaged.
Engine oil temperature transducers
B5 (GTH 4013EX) B13 (GTH 4017EX -
GTH 4514EX) damaged.
Problem of the wiring line.
Hydraulic oil thermometer on
dashboard damaged.
Hydraulic oil temperature transducer
damaged.
Fuse damaged.
Problem of the wiring line.
Fuse blown.
Dashboard fuel gauge damaged.
Fuel detectors B12/B12a (GTH 4017EX
- GTH 4514EX) B15/B15A (GTH 4013EX)
damaged.
Problem of the wiring line.
GTH-4017EX GTH-4514EX GTH-4013EX
November 2008
Solutions
Check the pressure switch and
replace if necessary.
Check the indicator light and replace
the lights group if necessary.
Check the wiring for continuity.
Check the efficiency of the bulb and
replace, if necessary.
Check the indicator light and replace
the lights group if necessary.
Check the wiring for continuity.
Check the thermometer and replace
if necessary.
Check the transducers and replace
if necessary.
Check the wiring for continuity.
Check the thermometer and replace
if necessary.
Check the transducer and replace
if necessary.
Check the fuse and replace if
necessary.
Check the wiring for continuity.
Check the fuse and replace if
necessary.
Check the fuel gauge and replace
if necessary.
Check the fuel detector and replace
if necessary.
Check the wiring for continuity.
Document 57.0009.0427