Table of Contents
Advertisement
Section 4 - Maintenance Procedures
TABLE A
A-15 CHECK
THE
SYSTEM (STANDARD ISO 6292)
1 CHECK PARKING BRAKE:
- Load the maximum payload onto the forks (4000
Kg for GTH 4013 EX - GTH 4017 EX; 4500 Kg for
GTH 4514 EX).
- Retract boom and forks fully.
- Lift the forks at about 50 cm on the ground.
- Stop the machine on a sloped surface of about 15%
(8.5°). If possible, use a oscillating axle.
- Engage the parking brake.
Check the parking brake with the forward or reverse gear
put and ensure the machine is stopped.
2 CHECK SERVICE BRAKE
- Retract boom and forks fully.
- Lift the forks at about 50 cm on the ground.
- Ensure the space is enough to stop the machine.
- Start the machine at maximum speed.
- Brake using the service brake until the machine is
completely stopped.
- Measure the space between the beginning and the
end of the raking.
- Maximum value: meter 19,23 (see TEST REPORT
cod. 57.1400.8105).
18
EFFICENCY
OF
BRAKING
GTH-4017EX GTH-4514EX GTH-4013EX
GTH 4013 EX
1
1
T
2
November 2008
GTH 4017 EX
N
GTH 4514 EX
R
Document 57.0009.0427
Advertisement
Table of Contents
